The new Fassi France company is presented at Intermat

The aim is to create a leading French group in the equipping of industrial vehicles

At the Intermat trade fair, one of the most important events in Europe in the concrete industry, that will be held in Paris from 20th to 25th April, the French distributor of the Italian industrial group, a manufacturer of articulated cranes and world leader in the lifting sector, will be presented to the market with the new name “Fassi France”.

At stand L 116 in Hall 7, two vehicles will be exhibited: one equipped with the Fassi F155A.0.22 articulated crane, coupled with a Forez Bennes caisson, and the other with an Ampliroll AL20 54 hook roll-off system. Externally another two vehicles will be visible with the same characteristics: one in outdoor area 7, in lane D 002, and the other in outdoor area 5, in lane G027.

IAA 2014: Fassi presents the latest models of the new XE and XHE ranges

The Fassi Gru industrial group, a leader in the lifting sector, will be participating in the IAA 2014 industrial vehicle trade fair, that will be held in Hannover from 25th September to 2nd October, one of the largest international trade fairs dedicated to the transport and industrial vehicle sectors. Now, in its 65th edition, IAA is organised by VDA (German association of the automobile industry), the most authoritative industry association present in Germany.

Proposing new quality products means investing in innovative processes developed as a result of the constant desire to offer ideas and solutions to the market and the ability to interpret and anticipate its needs. Nowadays, to achieve new and effective results, Fassi Gru integrates mechanical solutions with electronic ones, ergo mechatronics. The attention of the Italian manufacturer focuses entirely on innovation and technology and the new models reflect this clear orientation.

On display in the outdoor area M stand 37 there will be the latest models of the new XE and XHE ranges, which introduce design and innovative features resulting in performance that places these models at the top in terms of lifting capacity. In particular, the “heavy-duty” F990RA xhe-dynamic crane model will be on display. At the same time, a new model of the Micro series will be presented in preview (M40A, the only crane in this range with linkage system) together with the F85B.0, a new model in the 8 ton/m class.

The impressive F1950RAL.2.28 will also be on display, mounted on a 4-axle vehicle from Denmark: a crane with a 137,6 ton/m lifting capacity that, with its jib and manual extensions, obtains a height outreach of 50 m. This very compact unit, in standard configuration (without any accessories), reaches a total weight of 32 t with all the consequent benefits of road use.

World premiere of Fassi at the Swedish 2014 Elmia Lastbil trade fair

Fassi Gru, a world leader in the lifting industry, will be present as usual at the Elmia Lastbil Swedish trade fair dedicated to the industrial vehicle sector scheduled to be held in Jönköping (320 km south west of Stockholm) from 20th to 23rd August. A biennial appointment that was established more than 30 years ago and that on the occasion of the last edition of 2012 attracted nearly 40,000 visitors and 434 exhibitors from all over Europe.

Fassi will take part at the 2014 Eurosatory exhibition

For the fifth time, Fassi Gru S.p.A. will take part at the most important European exhibition dedicated to safety and defence that will take place in Paris from the 16th to the 20th of June. At the “Pe6b E230” exhibition stand located in the external area of the exhibition grounds, Fassi will present a crane prototype with “extremely reduced height in transport position” designed for logistics vehicles of air freight divisions as well as three cranes for light lifting.
The Marrel roll-offs AL 20 DIN 60 (installed on a VOLVO FH16 6x2L EURO 6 with wheelbase 4800 + 1370 mm) and AL 6 DIN 29 (installed on an IVECO Daily 70C17K with wheelbase 3450 mm) dominated Fassi’s stand. The AL 20 sturdy tipper roll-off caisson, almost fully mechanic and with a 20-ton carrying capacity, ensures a quick and adjustable coupling, as well as a closure facing inward or outward thanks to its interchangeable hooks. With a 6-ton carrying capacity, the roll-off AL 6 D 29 proved to be an equally interesting product for the construction, agricultural and recycling sectors; moreover, the electronic control unit is solid and compact.

The cranes include the brand new Fassi F165AZ, featuring an innovative design that allows the reversed folding of the outer boom. Not only does this new model reflect Fassi’s construction philosophy, but it also represents a solution capable of improving the performance of the crane itself, without neglecting product reliability. For the first time, the booms can be moved through a single chain ram assembled inside the outer boom: this makes it possible to optimize use of the available space, so that all hydraulic hoses fit inside the boom.

In collaboration with the Cranab company, Fassi also introduced a crane for the forestry sector. The model on display offered an overview of the technology and high performance offered by the Swedish equipment.

Fassi Gru S.p.A. - Loader cranes manufacturer since 1965

Fassi Gru is the market leader among Italian producers. Its product range and sales numbers place it among the top producers of hydraulic cranes in the world.

Fassi’s production potential is approximately 12,000 cranes per year. The entire range is exported and distributed throughout the world through an efficient and widespread distribution network. From Canada to France, from the UK to Australia, Fassi’s professionalism is reflected in the company’s goal of meeting different market needs, which are often linked to the specific geographical and economic conditions of individual countries.