- Details
Fassi Schweiz AG installs a Fassi F1150RA.2.28 xhe-dynamic loader crane with L616 jib in Oberentfelden for a crane rental company
Oberentfelden (Switzerland) – At the end of June, Fassi’s Swiss dealer, Fassi Schweiz AG, supplied and installed a Fassi F1150RA.2.28 xhe-dynamic loader crane with L616 jib onto a R490 LB Scania 10x4 truck with tipper trailer body for the customer Caduff SA at its workshop in Oberentfelden in the canton of Aargau. The company is based in Tavanasa and provides transport and, during winter, snow-clearing services, but specializes above all in crane work, and has cranes available with capacities ranging from 14 to 195 tm, most of which are Fassi models.
- Details
The Fassi Customer Encore Trucking & Transport Ltd. lifts an aeroplane at Cooking Lake Airport with a Fassi F455RA.2.28 e-dynamic knuckleboom crane
Cooking Lake (Canada) – Towards the end of June, the Fassi customer Encore Trucking & Transport Ltd. was commissioned to assist with maintenance work to an aeroplane at the Cooking Lake Airport, with the help of the company’s Fassi F455RA.2.28 e-dynamic knuckleboom crane. The heavy-duty crane, mounted on a Sterling LT 9500 Tri Drive truck, lifted the plane so that floats could be installed underneath.
- Details
A Fassi F545RA.2 xe-dynamic truck crane installs Viktor Paluš’ Octopus sculpture for the Sculpture Line Festival in Olomouc
Olomouc (Czech Republic) – At the beginning of June, a Fassi F545RA.2 xe-dynamic truck crane carefully installed a statue of a giant octopus into the middle of a pond in Smetana's Gardens, located close to the centre of Olomouc, for the launch of the Sculpture Line Festival. The sculpture titled Octopus by the Slovakian artist Viktor Paluš is one of three sculptures that will share the public space until the end of September.
- Details
The Dutch Fassi dealer Van der Goes Hydraulics assembles a Fassi F990RA.2.28 xhe-dynamic loader crane with L616 jib for special transport services
Kwintsheul (Netherlands) – The Dutch Fassi dealer Van der Goes Hydraulics recently supplied a Fassi F990RA.2.28 xhe-dynamic loader crane with L616 jib and V20 winch on a Volvo FH 8x2 truck to Van der Goes Europa B.V. Both companies belong to the van der Goes Group, based in the village of Kwintsheul in the province of South Holland, with the latter providing special transport services.
- Details
Two Fassi F710RAF.2.26 xhe-dynamic loader cranes with L426 jibs work on the New Champlain Bridge in Montreal
Montreal (Canada) – Two Fassi F710RAF.2.26 xhe-dynamic loader cranes with L426 jibs are being used in Montreal to build a replacement for the Champlain Bridge, which connects several boroughs of the city. The companies Signature on the Saint Lawrence and Infrastructure Canada (a governmental entity) began working in 2015 to construct another cable-stayed bridge by the end of 2018.
- Details
Fassi co-sponsors Team Schwabentruck IVECO in Round 4 of the FIA European Truck Racing Championship 2018 at the Slovakia Ring circuit
Orechová Potôň (Slovakia) – From 13th – 15th July, the Slovakia Ring in Orechová Potôň will host its first international truck race, Round 4 of the FIA European Truck Racing Championship, in which Fassi is a co-sponsor with IVECO of the Team Schwabentruck IVECO racers, Steffi Halm and Gerd Körber. Located approximately 30 km away from Bratislava, the race track’s length of 5,922 m makes it one of the longest tracks in Europe.
- Details
A Fassi F485RA.2.25 xe-dynamic hydraulic crane for an Hungarian electricity network
Aszód (Hungary) – Last week, Fassi’s Hungarian distributor, the company GIF Modul Commercial and Supplying Ltd., supplied and installed an F485RA.2.25 xe-dynamic hydraulic crane for the customer NKM Áramhálózati Kft. Said company is dedicated to building and maintaining a large electricity network and, as such, will use the crane for work where precision and strength are key, such as installing electricity pylons.
- Details
On the YouTube Channel, the accounts of Jan Lodewijckx and Luc Gommé
According to the owner of the Belgian rental company Allo Rent, Mr. Jan Lodewijckx, “whatever the size and conditions of the load, the F2150RAL.2.28 L816L xhe-dynamic crane can be controlled with extreme precision, and it is therefore perfect for fitting operations which require extreme accuracy”.
- Details
Fassi France hosted a successful edition of its annual “Journée Italienne” (Italian Day) in Saint-Ouen-l'Aumône, Paris
Saint-Ouen-l'Aumône (France) – On Thursday 21st June, Fassi France hosted its 19th annual “Journée Italienne” (Italian Day) at its headquarters in Saint-Ouen-l'Aumône, Paris. More than 500 people attended the event, in which the group presented its product ranges, including the Fassi cranes F26A through F1650RA, the Jekko JF 445, to the Marrel Ampliroll AL 20 PA hook lift.
- Details
A Fassi F545RA.2.26 hydraulic crane for a transport and handling company in the Toulouse area
Aucamville (France) – Earlier this year, the transport and handling company Transports THURIES took delivery of a Fassi F545RA.2.26 hydraulic crane with three additional mechanical extensions, mounted on a Scania R6 2 tractor unit. The company, based in the town of Aucamville, not far from Toulouse, already has several truck-mounted, heavy-duty Fassi cranes in its fleet and this acquisition will be its fifth.
