- Details
For the Fassi F990RA.2.28 xhe-dynamic crane in the pictures moving a fractionation column is not a hard feat
Comun Nuovo (Bergamo) – In recent days we have received some pictures from a customer who used a Fassi F990RA.2.28 xhe-dynamic crane to move part of a fractionation column for refining. The crane used for this operation was installed onto a Volvo FH16 650 four-axle truck with a body without sides (removable when necessary). (Courtesy of A. Bonfanti - Bonfanti Trasporti).- Details
A Fassi F1150RA.2.27 xhe-dynamic crane with L616 jib installed on a Volvo FH 500 truck with low-bed trailer for construction in Austria
Klagenfurt (Austria) – Fassi’s distributor Kogler Krantechnik GmbH, based in Klagenfurt, Austria, recently delivered a F1150RA.2.27 xhe-dynamic crane equipped with an L616 jib, IoC (Internet of Cranes) remote assistance system, simplified winch control system (AWC), folding pulleys and stabilisation at the front of vehicle. The Volvo FH 500 truck has been designed in such a way that a low-bed trailer can be connected via the fifth wheel coupling. (Courtesy of D. Klösch - Kogler Krantechnik GmbH).
- Details
A Fassi F1150RA.2.28 xhe-dynamic crane and a F990RA.2.27 xhe-dynamic crane handled 91 prefabricated units without problems
Gothenburg (Sweden) – When it comes to using Fassi cranes to move prefabricated units for temporary school buildings, it is always a matter of giving good news. The need for a temporary building usually arises as a temporary solution until the construction of a new building is completed, as is probable in this case too. On this occasion the client's task in Sweden was to dismantle a temporary structure made up of 91 units.. (Courtesy of B. Ljung - Fassi Sverige AB).
- Details
The collaboration of Fassi's importer and distributor in Finland, Grutech Oy, with Nappa Machine Oy
Valkeala (Finland) - Grutech Oy can count on the expertise and experience of Nappa Machine Oy, a multi-brand workshop with body shop specialising in crane installation, maintenance and repair. This spring Grutech Oy, Fassi's importer and distributor in Finland, based in Helsinki, prepared a splendid Volvo FH540 five-axle demo truck with a Fassi F1650RA.2.28 L816 xhe-dynamic crane in agreement with Nappa Machine Oy. (Courtesy of Esa Suominen for the Konepörssi magazine)
- Details
The FIA ETRC championship race in November in Misano has been cancelled due to Covid-19
Misano (Italy) - On Friday 30th October a statement was issued by the European Truck Racing Association (ETRA), the promoter of the European Truck Racing Championship, announcing that in agreement with the FIA and the local organiser of the last race the closing event of this year's season in Misano has been cancelled.
- Details
Dual operating modes for a Fassi F2150RAL.2.28 L816L xhe-dynamic crane
Oslo (Norway) - The Fassi importer-distributor in Norway, the company Nord-Kran A/S, has just delivered a Fassi F2150RAL.2.28 L816L xhe-dynamic crane mounted on a Scania 5-axle truck. The main feature of this wonderful set-up is the crane's dual power supply mode. Not only can the traditional mode work through the truck's power take-off, but thanks to a unit with electric pump (power pack) installed on the body, the crane can work in full electric mode, allowing it to operate in city centres at times when there are noise emission limits.
- Details
Fassi's importer in Spain has almost completed the installation of two Fassi F1150RA.2.28 L616 cranes
Lliçà de Vall (Spain) – Two Fassi F1150RA.2.28 L616 cranes fitted on two Iveco Trakker 4-axle trucks have now almost been completed by our importer/distributor, the company Transgrúas Cial S.L., which has represented the Fassi brand in Spain since 1978. These twin cranes belong to the load capacity class with a maximum lifting moment of 102 tm/1000 kNm. (Courtesy of K. Trenzano - Transgrúas Cial).
- Details
An Italian design icon installs a British one
Weeting (UK) - Long-time Fassi customer David Watson Transport Ltd was recently employed to install a display Mini at a Mini dealership in southern England. The Norfolk-based company used a Fassi F660RA.2.26 he-dynamic crane installed on a 4-axle Volvo rigid truck to lift the iconic British car (typically weighing between 1.5 -1.8 tonnes) and affix it to the outer wall of the dealership.- Details
Fassi will not be attending the 2020 edition of Ecomondo
Rimini (Italy) – The decision not to participate in the 24th edition of Ecomondo, scheduled in November at the Rimini exhibition centre, was particularly difficult and painful, but these days there are too many warning signs on the Covid emergency front.
- Details
Versatility is the main feature of this Fassi F185AC.2.26 crane fitted on a Mercedes Arocs 2053 truck
Bolzano (Italy) – Top-of-the-range Fassi cranes are not the only champions of versatility, as demonstrated by the installation of the Fassi F185AC.2.26 xe-dynamic crane with Fassi basket on the Mercedes Arocs 2053 truck with tipper body, which was recently prepared by the Italian Fassi dealer in Bolzano, the company Gerax of Cortaccia.