LIFTING CAPACITY:
up to 80,22 tm

MAX OUTREACH:
up to 32,00 m with jib

OVERALL DIMENSIONS:
l 1,80 m , w 2,50 m , h 2,57 m

ELECTRONIC/HYDRAULIC EQUIPMENT:
YouTubeButton 20px IMC integral machine control
YouTubeButton 20px FX800 control unit
YouTubeButton 20px D900 digital distributor bank
YouTubeButton 20px RCH/RCS radio remote control unit
YouTubeButton 20px ADC automatic dynamic control
YouTubeButton 20px flow sharing

CHARACTERISTICS:
he-dynamic version (.2): with linkage
YouTubeButton 20px XP device
YouTubeButton 20px Prolink system with double linkage
continuous rotation on a slew ring




STANDARD

IMC - Integral Machine Control
IMC - Integral Machine Control
It is the digital brain of the Fassi cranes which, through sophisticated electronics, in addition to the crane control systems, manages the best operating conditions to ensure the optimal machine performance and control applicable to all the work conditions. It uses a Can bus communication system between the peripheral sensors.
ADC - Automatic Dynamic Control
ADC - Automatic Dynamic Control
A control system developed by Fassi automatically controlling the dynamics of all the crane functions maximizing the speed of movement depending on the handled load, allowing only controlled movements and minimizing the structural stress on both the crane and the frame/sub frame of the vehicle.
D900 - Digital Multifunction Distributor Bank
D900 - Digital Multifunction Distributor Bank
High performances multifunction compensated hydraulic distributor bank with digital anti-saturation system thereby ensuring a superlative multifunction and proportional operation. Coupled with the Fassi XF (Extra Fast) system, it guarantees an extraordinary fluidity and speed of action.
RCH/RCS - Radio Remote Control
RCH/RCS - Radio Remote Control
The new-generation digital radio remote control, exclusively compatible with the Fassi product, with wide graphic display to remotely control the functions of the crane and, optionally, the vehicle and the outriggers. It automatically researches the available frequency and allows for continuous interaction between operator and crane.
FX800 - Fassi Electronic Control
FX800 - Fassi Electronic Control
A system that electronically controls the load conditions of the crane, of the hydraulic and manual extensions and of the winch, with technical and functional characteristics suited to specific crane models, especially those designed to provide high or very high operational performance, even in the most difficult and stressful working conditions. Moreover it manages the lifting moment with the possibility to activate different work sectors, in relation to the stability condition of the vehicle/crane unit.
FSC - Fassi Stability Control
FSC - Fassi Stability Control
A Fassi system that continuously monitor and ensure the ideal crane working conditions versus the vehicle/crane stability, based on the position of the lateral extension supports of the outriggers. The system is available in 3 versions: L (Low), M (Medium) and S (Super) characterized by different design and functionality to suite all possible configuration of all the different crane models.
CPM - Crane Position Monitoring
CPM - Crane Position Monitoring
A security system that detects if the lateral extension supports of the outriggers are fully retracted, both for manually and hydraulically extendable outrigger supports. Linked to the height check system of the crane, at rest in the transport position, it is completed by a visualizer with visual and acoustic alarm, to install on the dashboard of the vehicle cab.
OTC - Oil Temperature Control
OTC - Oil Temperature Control
Temperature control device electronically controlled, thanks to the analogic temperature sensor fitted inside the oil cooler, is capable of maintaining an optimal temperature of the hydraulic system even in the most stressful condition of use. The temperature value is shown on the user control panel and radio control handle display.
FS - Flow Sharing
FS - Flow Sharing
A system that proportionally distributes the oil from the pump to all manoeuvres simultaneously. It allows the operation of more functions at the same time by distributing the available oil flow proportionally to the desired functions and at the desired speed guaranteeing the perfect multifunction ability of the hydraulic distributor.
XF - Extra Fast
XF - Extra Fast
A Fassi system that, through dedicated pilot operated check valves in conjunction with the multifunction distributor, allows smoothly, precisely and sensitively movements with less oil heating and higher speeds of operation.
MPES - Multi Power Extension System
MPES - Multi Power Extension System
A Fassi system that guarantees an exceptional extension/retraction speed of the telescopic booms, built up by a set of equally powerful independent rams, linked in series connection and activated by a single control. Special independent fixing system of the extension rams to guarantee high vertical lifting performances.
XP - Extra Power
XP - Extra Power
A Fassi system that activates an excess of power in the most difficult situations, precisely when it’s necessary, proportionally reducing the speed of the crane movements but, at the same time, increasing the lifting capacity.
FL - Full Lift
FL - Full Lift
A system that allows you to select, based on operational needs, “FAST” (recycling valve activated) or “POWER” (recycling valve deactivated) while telescoping the booms. Selection is both via radio control thanks to the icon on the display or on the push button of the main control panel.
PROLINK - Progressive Link
PROLINK - Progressive Link
Exclusive Fassi system, built up by a longer outer lifting ram in conjunction with the linkage system, allowing to increase the working angle of the crane above the horizontal line from 10° to 15° according to the model, still maintaining in this configuration the nominal lifting performances. Prolink find application as well on the articulation ram of the jibs, with an increase of the working angle of the jib above the horizontal line from 10° to 20°.
UHSS - Ultra High Stregth Steel
UHSS - Ultra High Stregth Steel
Ultra high strength steel used for the construction of the Fassi structural components, with a high elastic limit, increases structural strength and resistance of the components and at the same time reduces the weight of the crane, to the benefit of the loading capacity of the vehicle which increases.
FWD - Fewer Welds Design
FWD - Fewer Welds Design
Fewer welded joints, the stronger the structure will be. Structural components made out of bended steel with a welded closing plate in lieu of four corners welded structures or monolithic structure likes those for the outer boom and sliding sections with one single welded side: balanced elasticity under load and ideal resistance to fatigue.
CQ - Cast Quality
CQ - Cast Quality
Fassi use for more then 35 years cast components with high mechanical characteristics for various important structural components, such as the bottom section (pinion) and the head of the column, the column support, the heads of the ram rods and the cylinder bottoms, the connecting rods and other minor components: less weldings, higher performance to fatigue cycles.


OPTIONAL

GV - Graphic Visualizer
GV - Graphic Visualizer
It is an innovative user panel that conveys all information concerning the crane operational status in clear way to the graphic display. This is a perfect interface between the operator and the crane to monitor the components in operation and for selection and activation of the on-board system functions by means of intuitive icons selectable via a rotary switch.
AV - Alphanumeric Visualizer
AV - Alphanumeric Visualizer
It is an user panel that conveys all information concerning the crane operational status in clear and simple way to the operator. This is an ideal interface between the operator and the crane as its alphanumeric screen displays all the basic information necessary to monitor the functions of the crane.
ME - Manual Extension
ME - Manual Extension
Fassi designed, developed and patented system which, combined with the electronic systems FX500 and FX800, uses a dedicated software to decide whether the load applied to the manual extension can be lifted or not, with reference to the foreseen loads. The system also provides the evaluation of the applied load.
JDP - Jib Dual Power
JDP - Jib Dual Power
A Fassi system that provides a double level of lift capacity for the hydraulic jib, depending from the hydraulic reach of the crane in vertical condition, controlled by outer boom extensions, ensuring inimitable performances of the hydraulic jib.

Fassi Gru S.p.A. - Loader cranes manufacturer since 1965

Fassi Gru is the market leader among Italian producers. Its product range and the number of cranes sold place it among the top producers in the world of hydraulic cranes.
The productive potential is approximately 12,000 cranes per year. The entire range is exported and distributed throughout the world via a rapid and widespread distribution network. From Canada to France, from England to Australia, Fassi professionalism has set itself the goal of meeting the different needs of the market, often linked to specific geographical and economic conditions of individual countries.

This website uses cookies, including those of third-parties, to offer you the best possible user experience in keeping with your preferences. By continuing to navigate or by clicking on any part of the page, you to the use of cookies. If you would like to learn more or opt out of all or some cookies, click here.