- Details
A Fassi F1150RA.2.28 xhe-dynamic crane with an L616 jib erects the Christmas tree in the centre of Copenhagen
Copenhagen (Denmark) – Last week a Fassi F1150RA.2.28 xhe-dynamic crane with an L616 jib installed a beautiful fir tree in the Town Hall Square in the centre of Copenhagen. It will be Copenhagen's Christmas tree, which has been traditionally decorated and lit during the Christmas period in the centre of the Danish capital for 105 years. (Courtesy of G. Rasmussen - Fassi Kraner ApS).
- Details
A Fassi F1150RA.2.27 xhe-dynamic crane with L616 jib installed on a Volvo FH 500 truck with low-bed trailer for construction in Austria
Klagenfurt (Austria) – Fassi’s distributor Kogler Krantechnik GmbH, based in Klagenfurt, Austria, recently delivered a F1150RA.2.27 xhe-dynamic crane equipped with an L616 jib, IoC (Internet of Cranes) remote assistance system, simplified winch control system (AWC), folding pulleys and stabilisation at the front of vehicle. The Volvo FH 500 truck has been designed in such a way that a low-bed trailer can be connected via the fifth wheel coupling. (Courtesy of D. Klösch - Kogler Krantechnik GmbH).
- Details
A Fassi F1150RA.2.28 xhe-dynamic crane and a F990RA.2.27 xhe-dynamic crane handled 91 prefabricated units without problems
Gothenburg (Sweden) – When it comes to using Fassi cranes to move prefabricated units for temporary school buildings, it is always a matter of giving good news. The need for a temporary building usually arises as a temporary solution until the construction of a new building is completed, as is probable in this case too. On this occasion the client's task in Sweden was to dismantle a temporary structure made up of 91 units.. (Courtesy of B. Ljung - Fassi Sverige AB).
- Details
Fassi's importer in Spain has almost completed the installation of two Fassi F1150RA.2.28 L616 cranes
Lliçà de Vall (Spain) – Two Fassi F1150RA.2.28 L616 cranes fitted on two Iveco Trakker 4-axle trucks have now almost been completed by our importer/distributor, the company Transgrúas Cial S.L., which has represented the Fassi brand in Spain since 1978. These twin cranes belong to the load capacity class with a maximum lifting moment of 102 tm/1000 kNm. (Courtesy of K. Trenzano - Transgrúas Cial).
- Details
The company Sun-Pacific Equipments Pte Ltd, importer and distributor of Fassi in Singapore, has built a Fassi crane F1150RA.2.28 L616
Singapore – 22nd July. A Fassi F1150RA.2.28 L616 xhe-dynamic crane was recently delivered on a Scania P410 XT 4-axle truck built by the company Sun-Pacific Equipments Pte Ltd, importer and distributor of Fassi in Singapore. Mounted behind the cab, this crane equipped with radio control and additional outriggers is technologically advanced, versatile and very powerful: it has a horizontal hydraulic outreach that exceeds 31 metres with the jib. The vehicle fitted with the Fassi crane is owned by Erect Group Pte Ltd - Singapore. (Courtesy of J. Goh - Sun-Pacific Equipments Pte Ltd).
- Details
A Fassi F1150RA.2.28 xhe-dynamic loader crane on a Scania truck in Sweden for handling and transporting boats
Gothenburg (Sweden) – The company Fassi Sverige AB of Gothenburg has delivered a F1150RA.2.28 xhe-dynamic crane, mounted on a Scania truck. Fassi’s distributor for Sweden also equipped the vehicle with three manual extensions, in addition to an L616 jib, supplementary outriggers and a front stabiliser. (Courtesy of N. Ringdahl - Fassi Sverige AB).
- Details
A Fassi F1150RA.2.28 hydraulic crane on a Scania truck delivered to a metalworking firm in Trebesing, Austria
Trebesing (Austria) – An F1150RA.2.28 crane equipped with an L616 jib and V30 winch, with automatic winch control and IoC system for remote crane servicing, was recently delivered by Fassi's Austrian importer, Kogler Krantechnik GmbH. Mounted on a four-axle Scania truck by the company Ressenig Fahrzegbau GmbH, this crane will be used in the transport and assembly of metal products for the construction sector, produced by the company Schwinger Metalltechnik of Trebesing in Carinthia. (Courtesy of D. Klösch - Kogler Krantechnik GmbH).
- Details
Another splendid Fassi F1150RA from Fassi's Finnish importer, Grutech Oy in Helsinki
Helsinki (Finland) – The customer who owns this Fassi F1150RA.2.28 xhe-dynamic crane with L616 hydraulic jib, the company Suomen Siirtonostot Oy, will certainly have great satisfaction working with this model of crane fitted on a long wheelbase Scania blue truck with low platform. When the crane-truck combination is designed to offer maximum versatility in terms of performance and stability you can rest assured that the more you use it, the more you will appreciate this crane. (Courtesy of C. Weber - Grutech Oy).
- Details
A Fassi F1150RA.2.28 L616 xhe-dynamic loader crane for timber construction in Löf an der Mosel, Germany
Löf an der Mosel (Germany) – The Niederdürenbach-based company Holzbau Dahm GmbH has recently pulled off a complex operation involving fitting the roof structure onto the shell of a detached house with an attached office wing in Löf an der Mosel in western Germany. The Fassi F1150RA.2.28 L616 xhe-dynamic crane used for the job was mounted on a new bright green FMX Volvo four-axle truck and, due to its maximum outreach of nearly 32 m with a jib, was able to lift the structure as well as a masonry saw, pallet jack and two pallets of aircrete blocks over an unsurfaced access area to the rear of the premises. (Courtesy of P. Leuten - Hauser Verlag).
- Details
The Finnish distributor of Fassi has supplied a spectacular F1150RA.2.28L616 xhe-dynamic crane installed on a 5-axle SISU 10x4 truck to the company KamRock Oy
Kempele (Finland) – When it comes to choosing an important crane for demanding tasks, there is no doubt that a Fassi crane such as the F1150RA model can solve different working situations in the best possible way. This is the case of a customer of Fassi's Finnish distributor, Grutech Oy, who did not hesitate to recommend and fit a SISU 5 axle 10X4 truck with a Fassi F1150RA.2.28L616 xhe-dynamic crane. (Courtesy of C. Webber - Grutech Oy).
