Fassi Ladekrane GmbH

  • A Fassi crane for water systems

    Fassi F135A.2.23 e-dynamic

    A Fassi F135A.2.23 e-dynamic hydraulic crane installed on a JCB 4190 Fastrac tractor at work on the island of Rügen, Germany

    Rügen (Germany) – At a time when tourism to the islands of Rügen, Ummanz and Hiddensee is increased, the islands’ water consumption is set to reach its peak. Under such pressure, a solution is the new custom-made Fassi F135A.2.23 e-dynamic crane belonging to the Rügen municipal water supply company’s (ZWAR), based on the island of Rügen, located off the Pomeranian coast of North-East Germany. (Courtesy of P. Leuten - Hauser Verlag)
  • A Fassi F1150RA crane for timber construction

    F1150RA.2.28L616 xhe-dynamic

    A Fassi F1150RA.2.28 L616 xhe-dynamic loader crane for timber construction in Löf an der Mosel, Germany

    Löf an der Mosel (Germany) – The Niederdürenbach-based company Holzbau Dahm GmbH has recently pulled off a complex operation involving fitting the roof structure onto the shell of a detached house with an attached office wing in Löf an der Mosel in western Germany. The Fassi F1150RA.2.28 L616 xhe-dynamic crane used for the job was mounted on a new bright green FMX Volvo four-axle truck and, due to its maximum outreach of nearly 32 m with a jib, was able to lift the structure as well as a masonry saw, pallet jack and two pallets of aircrete blocks over an unsurfaced access area to the rear of the premises. (Courtesy of P. Leuten - Hauser Verlag).
  • A Fassi F155A.0.24 crane for handling signage

    Fassi F155A.0.24 active

    A German signage manufacturer and assembler receives a Fassi F155A.0.24 active articulated crane on Mercedes-Benz Arocs truck in Stollberg

    Stollberg (Germany) – At the beginning of March, the German distributor Fassi Ladekrane GmbH supplied an F155A.0.24 active articulated crane for the company Schilderwerk Beutha GmbH. The company is a manufacturer and assembly partner for display and signage systems for the private and public sectors and has a main plant in the town of Stollberg, as well as several other branches across East Germany.
  • A Fassi F1650RA used in construction

    F1650RA.2.28 xhe-dynamic

    A Fassi F1650RA xhe-dynamic crane that solves demanding operations and helps construction companies save time is a precious tool

    Wermelskirchen (Germany) – Working to lift and install concrete parts on construction sites in advanced stages of work is always a challenging task. If workspaces are restricted, it is necessary to rely not only on the absolute precision of the crane during installation, but also on the competence and experience of the operator. The German company Manfred Hausmann has just added a MAN TGS truck equipped with an extraordinary Fassi F1650RA.2.28 xhe-dynamic crane to its fleet of vehicles, which operates out of Wermelskirchen (Courtesy of P. Leuten - Hauser Verlag).
  • A Fassi F165A crane for construction recycling

    Fassi F165A e-active

    A Fassi F165A e-active articulated crane for recycling for the construction industry in Hamburg

    Hamburg (Germany) -The company Peter Beuck Recycling GmbH has acquired a Fassi F165A e-active crane to assist in the collection of recyclable construction materials in the Hamburg area. Thanks to the combination of the loader crane, tipper body and Volvo FH 420 truck, the company can deliver containers as large as 36 cubic metres to clients, as well as collect large bags of materials for recycling, enabled by its maximum lifting moment of up to 15.8 tm.

  • A Fassi F2150RA.2.28 lifts wind turbine parts

    Fassi F2150RA.2.28

    A successful operation in the north of Germany with a truck-mounted Fassi F2150RA.2.28 xhe-dynamic crane

    Büsum (Germany) - The building contractor Dennis Bruß of the company Bruß Bau GmbH has carried out a heavy lifting job with the new addition to its fleet, a five-axle Volvo FH 540 truck installed with a Fassi F2150RA.2.28 xhe-dynamic crane, which comes in at the top of Fassi’s range and is fully equipped with an L816 jib and a V40L-winch. The company is based in the region of Heide and is associated with the shell construction of detached houses, multiple dwellings, commercial and agricultural buildings as well as refurbishments (Courtesy of Courtesy of P. Leuten, Hauser Verlag).
  • A Fassi F345RB perfect for a construction firm

    Fassi F345RB xe-dynamic

    A dynamic German construction company in Saxony-Anhalt recently received a Fassi F345RB xe-dynamic crane

    Zahna (Germany) – May 2020. Fassi's new model, the F345RB xe-dynamic crane fitted on a MAN TGS 26.470 truck, was delivered to Elster Bau GmbH, a construction company based in Zahna in Saxony-Anhalt, that specialises in the construction of single-family houses, industrial buildings and renovations. It employs 57 people and is known not only within the region, but also in the neighbouring states of Brandenburg and Saxony.
  • A positive end to the IAA 2018 fair for Fassi

    A positive end to the IAA 2018 fair for Fassi

    The Fassi Group stand experiences a hugely successful IAA Commercial Vehicles fair in Hannover

    Hannover (Germany) – As the IAA Commercial Vehicles fair in Hannover draws to a close for another two years, Fassi takes a moment to reflect on its successes and challenges during this important event. In the 67th edition of this internationally renowned fair, more than 2100 exhibitors from nearly 50 different countries presented over 300 world premieres on around 280,000 m² of exhibition space to around 250,000 visitors, thus illustrating the potential of this dynamic key sector.
  • Delivering concrete with a Fassi F710RA.2.26

    Fassi F710RA.2.26 xhe-dynamic

    A powerful Fassi F710RA.2.26 loading crane fitted at the rear of a Volvo FH 500 truck helps the company Ruf Baustoffe achieve maximum customer satisfaction

    Nuremburg (Germany) - May 2021. With a Fassi F710RA.2.26, the company RUF GmbH of Wilburgstetten is able to move and unload precast concrete parts directly on construction sites. As well as being a large distributor of building materials, the company also has a major production plant for precast concrete parts for industrial and commercial buildings.
  • Fassi at GaLaBau 2018

    GaLaBau 2018

    Fassi Ladekrane will exhibit at GaLaBau 2018, a fair for landscaping, maintenance and construction technologies in Nuremberg

    Nuremberg (Germany) – From 12th – 15th September, Fassi’s German distributor Fassi Ladekrane GmbH will be exhibiting Fassi products at the 23rd edition of GaLaBau, the leading trade fair for landscaping, maintenance and construction of urban and green spaces, held in Nuremberg. More than 1,300 exhibitors will attend, as well as over 64,000 visitors from the sectors of horticulture, landscape gardening and open space construction and professionals such as landscape architects and government, state and municipal development planners.

Fassi Gru S.p.A. - Costruttore di gru articolate dal 1965

Fassi Gru è leader di mercato tra i produttori Italiani. La sua gamma di prodotti e il numero di gru vendute la pongono ai vertici tra i produttori mondiali di gru idrauliche.
La potenzialità produttiva è di circa 12000 gru all’anno. L’intera gamma è esportata e distribuita in tutto il mondo per una rapida e capillare distribuzione. Dal Canada alla Francia, dall’Inghilterra all’Australia, la professionalità Fassi si pone l’obiettivo di soddisfare le diverse necessità del mercato, spesso legate alle specifiche condizioni geografiche ed economiche delle singole nazioni.