Tag: 

Fassi Ladekrane GmbH

  • A Fassi F155A.0.24 crane for handling signage

    Fassi F155A.0.24 active

    A German signage manufacturer and assembler receives a Fassi F155A.0.24 active articulated crane on Mercedes-Benz Arocs truck in Stollberg


    Stollberg (Germany) – At the beginning of March, the German distributor Fassi Ladekrane GmbH supplied an F155A.0.24 active articulated crane for the company Schilderwerk Beutha GmbH. The company is a manufacturer and assembly partner for display and signage systems for the private and public sectors and has a main plant in the town of Stollberg, as well as several other branches across East Germany.
  • A Fassi F165A crane for construction recycling

    Fassi F165A e-active

    A Fassi F165A e-active articulated crane for recycling for the construction industry in Hamburg

    Hamburg (Germany) -The company Peter Beuck Recycling GmbH has acquired a Fassi F165A e-active crane to assist in the collection of recyclable construction materials in the Hamburg area. Thanks to the combination of the loader crane, tipper body and Volvo FH 420 truck, the company can deliver containers as large as 36 cubic metres to clients, as well as collect large bags of materials for recycling, enabled by its maximum lifting moment of up to 15.8 tm.
     


  • A Fassi F2150RA.2.28 lifts wind turbine parts

    Fassi F2150RA.2.28

    A successful operation in the north of Germany with a truck-mounted Fassi F2150RA.2.28 xhe-dynamic crane

    Büsum (Germany) - The building contractor Dennis Bruß of the company Bruß Bau GmbH has carried out a heavy lifting job with the new addition to its fleet, a five-axle Volvo FH 540 truck installed with a Fassi F2150RA.2.28 xhe-dynamic crane, which comes in at the top of Fassi’s range and is fully equipped with an L816 jib and a V40L-winch. The company is based in the region of Heide and is associated with the shell construction of detached houses, multiple dwellings, commercial and agricultural buildings as well as refurbishments (Courtesy of Courtesy of P. Leuten, Hauser Verlag).
  • A positive end to the IAA 2018 fair for Fassi

    A positive end to the IAA 2018 fair for Fassi

    The Fassi Group stand experiences a hugely successful IAA Commercial Vehicles fair in Hannover


    Hannover (Germany) – As the IAA Commercial Vehicles fair in Hannover draws to a close for another two years, Fassi takes a moment to reflect on its successes and challenges during this important event. In the 67th edition of this internationally renowned fair, more than 2100 exhibitors from nearly 50 different countries presented over 300 world premieres on around 280,000 m² of exhibition space to around 250,000 visitors, thus illustrating the potential of this dynamic key sector.
  • Fassi at GaLaBau 2018

    GaLaBau 2018

    Fassi Ladekrane will exhibit at GaLaBau 2018, a fair for landscaping, maintenance and construction technologies in Nuremberg


    Nuremberg (Germany) – From 12th – 15th September, Fassi’s German distributor Fassi Ladekrane GmbH will be exhibiting Fassi products at the 23rd edition of GaLaBau, the leading trade fair for landscaping, maintenance and construction of urban and green spaces, held in Nuremberg. More than 1,300 exhibitors will attend, as well as over 64,000 visitors from the sectors of horticulture, landscape gardening and open space construction and professionals such as landscape architects and government, state and municipal development planners.
  • Fassi at the 2017 NordBau construction fair

    2017 NordBau

    Fassi’s German distributor, Fassi Ladekrane GmbH, will participate in the 2017 NordBau construction fair in Neumünster


    Neumünster (Germany) – From 13th to 17th September, Fassi’s German distributor, Fassi Ladekrane GmbH, will be participating in the 61st edition of the NordBau construction fair, held in the Holstenhallen venue in Neumünster, located in the Schleswig-Holstein region in the north of Germany.
  • Fassi at the IAA 2018 transport show

    IAA 2018

    New Fassi technology to be presented at the IAA 2018 transport, logistics and mobility show in Hanover


    Hanover (Germany) – From 20th – 27th September, Fassi Group brands will be exhibited at the 67th edition of the IAA Commercial Vehicles show in Hanover, the world’s largest trade show for transport, logistics and mobility, which is held every two years. It offers a unique cross section of the entire industry, from vehicles to wider transport and logistics, and from manufacturers to the many medium-sized suppliers. The fair usually features over 2,000 exhibitors in around 270,000 m² of exhibition space, with an estimated turnout of approximately 250,000 visitors.
  • Fassi at the NordBau 2018 construction fair

    Fassi NordBau 2018

    Fassi hydraulic cranes at the NordBau 2018 construction exhibition in Neumünster


    Neumünster (Germany) – From 5th – 9th September, Fassi's German distributor Fassi Ladekrane GmbH will exhibit Fassi loader cranes at the 63rd edition of NordBau, the annual construction exhibition held at the Holstenhallen venue in the town of Neumünster in the north of Germany. The fair is a forum for the latest issues and products of the building industry, presented by over 900 exhibitors from 15 countries in a covered area of around 20,000 m² and in an outdoor area of around 69,000 m².
  • Fassi at the NUFAM 2017 trade fair

    Fassi Ladekrane GmbH - NUFAM 2017

    Fassi’s German distributor, Fassi Ladekrane GmbH, will be exhibiting Fassi loader cranes at the NUFAM 2017 trade fair


    Rheinstetten (Germany) – From 28th September to 1st October, Fassi’s German distributor, Fassi Ladekrane GmbH, will be exhibiting Fassi loader cranes at the 5th edition of NUFAM, to be held at the Messe Karlsruhe (Karlsruhe exhibition centre) in the town of Rheinstetten in southwest Germany. The biennial trade fair is dedicated to commercial vehicles in the transport, logistics, construction, automotive and public sectors and usually attracts around 22,800 visitors over the course of four days.
  • Fassi Ladekrane at TiefbauLive 2017

    TiefbauLive 2017

    Fassi’s German distributor Fassi Ladekrane GmbH to exhibit at the TiefbauLive 2017 trade fair


    Rheinstetten (Germany)
    – Fassi’s German distributor Fassi Ladekrane GmbH will be attending the TiefbauLive 2017 trade fair from 27th -29th April. The fair is a dual event, featuring over 200 exhibitors from different sectors – construction machinery, add-on units and related services for the civil engineering, earthwork and road maintenance sectors (TiefbauLive), and the green and recycling sectors (recycling aktiv).

Fassi Gru S.p.A. - Loader cranes manufacturer since 1965

Fassi Gru is the market leader among Italian producers. Its product range and sales numbers place it among the top producers of hydraulic cranes in the world.

Fassi’s production potential is approximately 12,000 cranes per year. The entire range is exported and distributed throughout the world through an efficient and widespread distribution network. From Canada to France, from the UK to Australia, Fassi’s professionalism is reflected in the company’s goal of meeting different market needs, which are often linked to the specific geographical and economic conditions of individual countries.